The 1990 Americans with Disabilities Act prompted the Architectural and Transportation Barriers Compliance Board to ascertain accessibility guidelines for public play areas. Those guidelines embrace, however aren't limited to the subsequent things public playgrounds should do:
1. Offer opportunities for use of play areas by kids with a selection of abilities
2. Support social interaction among youngsters in play areas
3. Produce play space challenges, however not barriers
4. Maintain ASTM (Yankee Society for Testing and Materials) safety standards
5. Enable freelance use as abundant as attainable
6. Give access to elevated structures for disabled children
7. Help designers and designers incorporate improved access into new designs.
Playground surfacing should take into consideration wheelchair access and maneuverability. ASTM standards need surfaces to be "firm, stable, and slip resistant." Soft rubber tiles are samples of surfacing materials that offer safety and accessibility. Rubber chips and wood chips are higher surfaces than sand or pea gravel, however they're not as easy for those in wheelchairs to navigate as pour-in-place rubber surfaces or soft rubber tiles.
Maybe the most necessary step in building an accessible play area is providing an accessible route to and thru the play area. Several outdoor recreation facilities use a combination of loose fill and unitary surfacing to accommodate all youngsters adequately. To forestall wheelchairs from dropping off access ways' edges and tipping over, it is best to install a gradually sloping transition fringe of thirty degrees or less. Access methods should be a minimum of 5 feet wide, or wide enough for two wheelchairs. There ought to conjointly be a turnaround/parking house a minimum of 5 feet in diameter put in next to any playground equipment that requires a child to transfer from a wheelchair onto the structure.
Transfer points are places where disabled kids move from their wheelchair onto the play structure itself. Physical therapists report that 40-sixty% of wheelchair users can transfer out of their chairs onto a play structure. Youngsters need a transfer point from 11 to eighteen inches high therefore that they can create the transfer by themselves. Transfer points should conjointly feature grab bars or alternative assisted devices.
Ramps conjointly offer access for disabled kids to elevated decks and surfaces. The ramps want to be at least thirty six inches wide, with a slope of no more than one:12 (a rise of one foot in height for each twelve horizontal feet), and they need to have handrails and curbs. The Americans with Disabilities Act needs access to at least 0.5 of the elevated play parts by ramp. However, if there are fewer than 20 elevated play components, access via transfer points is acceptable. If there are more than 20 elevated play structures, a minimum of a quarter of them should have ramp access.
However wheelchair access is solely one goal in making playgrounds accessible for disabled children. The requirements of sight or hearing impaired youngsters and kids with developmental disabilities or alternative physical and mental challenges should not be ignored.
Conjointly remember that the steps taken to extend accessibility to disabled children will profit all children. Roomier decks, shorter stair heights, and ramps are user-friendly to everybody, and grab bars and handrails are safety features that every one youngsters will benefit from.
Author Resource:-
Coye Daniels has been writing articles online for nearly 2 years now. Not only does this author specialize in developmental disabilities,you can also check out his latest website about:
Plastic Dolls Which reviews and lists the best
![[Valid RSS feed]](http://www.healthandwealth4you.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
